Saturday, October 15, 2005

Flickr

This is a test post from flickr, a fancy photo sharing thing.

Friday, October 14, 2005

Utilities and Components required by Wilcom products

Utilities and Components required by Wilcom products

Design Workflow, Design Warehouse and Carpet Design Warehouse Users:
-
Microsoft SQL Server 2000 Service Pack 3a
We recommend users install this Service Pack for all MSDE installations (Note: Please read the service pack system requirements and
instructions on the Microsoft web site before installing the service pack). Note: If you have SP3 installed already then there is no need to install SP3a.

Microsoft 'XML' plugin required by Wilcom Design Explorer and Wilcom Design Warehouse/Workflow to generate design thumbnails..

Notes:
The plugin can also be installed by installing Internet Explorer V6.0 or later.
The plugin can only be installed on Win98SE or later.
The plugin is not required for Wilcom V7 onwards.

Download and Installation Instructions:
1)
Click here to download the MSXML3.MSI file (771Kb) and click the Save button when prompted.
2) Once the file has been downloaded, double-click the file and follow the on-screen instructions to install. The file can be copied and installed on any PC.

720K DOS Floppy Disk Format Utility for Windows XP - In Windows XP Microsoft has removed the ability to format 720K DOS DD disks, but has kept the ability to read from and write to these disks. This is because the DOS 720K format is considered old technology, which Microsoft moving away from this old format. It is however still possible to format 720K DOS disks by using the command line "Format /t:80 /n:9 a:". Rather than try to remember this command line though, Wilcom Support has packaged this command line into a small batch file which you can simply run from your Desktop.

Download and Installation Instructions:

1) Click here to download the WinXP_720K.bat file (1 kb) and click the Save button when prompted.
2) Select your Windows Desktop as the location to save the 'WinXP_720K.bat' file to, then click the Save button to save the file to your Desktop.
3) To run the utility, double-click the 'WinXP_720K.bat' file.
4) Follow the on-screen instructions to format the disk.

Caution: Always use DS/DD disks when formatting as 720K. DO NOT USE DS/HD disks with the hole taped over, as data written to such disks WILL INEVITABLY be lost after a time. DS/HD disks are not designed to take data designed for DS/DD disks and vice-versa.

MD-DOS files required by DOS Wilcom ES (Version 4.5 and earlier) - Some old DOS files required by DOS ES are no longer included with Microsoft Windows. The ZIP file below contains all the files you may be missing. Unzip the file and copy the files therein to your C:\DOS folder.


Note: If you do not have a C:\DOS folder you need to create one, as DOS ES looks to the C:/DOS folder for these files..

Download and Installation Instructions:

1) Click here to download the 'MS-DOS files required by DOS ES.zip' file, click the Save button when prompted.
2) Select your Windows Desktop as the location to save the 'MS-DOS files required by DOS ES.zip' file to, then click the Save button to save the file to your Desktop.
3) UnZIP the ZIP file.
4) Copy the contents of the file to the C:/DOS folder (you will need to create a C:/DOS folder if you do not already have one on your C: drive).

Thursday, October 06, 2005

Send a File

Send Me A File

Tuesday, October 04, 2005

Wilcom 9 Install Tutorial, Step by Step

WilcomES Designer 9 SP4 Installation Tutorial

You Will Need the the Following Files to perform the install:

(ServicePack4 is Not Required But is Recommended for a UpTo Date Installation)

CD-ISO: Wilcom9.iso

Service Pack: WilcomV9_SP4.zip

Patch : Wilcom 9.0R Patch.zip

Installation:

When Installing Wilcom 9, Two Options Are Avalaible. Install From the .ISO, or Extract The .ISO with WinRar : (winrar is very simular to winzip but ready many more filetypes)

In My Experience the .ISO Install, although a bit more technical, is the Best Aproach, however both work, and are the Exact Same, other than where you Install From. if you are not comfortable installing Damemon Tools, the alternative method is to Simply Extract the ISO with Winrar into a Folder. From the Extracted Folder you can run setup.exe and Install from there.

ISO Method: When Installing from the .ISO You will Need to Download Daemon Tools . Download Here Ounce you have Installed DTools, you can start it by running c:\Program Files\D-Tools\daemon.exe.

Daemon Tools Tray Icon

You will Notice a Icon In you SysTray.

Right Click The Icon. Select Virtual CD/DVD-Rom / Select Number of Devices / Choose 1 Device.

As Shown Below

Enabling Virtual CDRom

Next You Open the Same Menu, This time you Will Mount The Wilcom.ISO as Shown Below.

Mount the ISO Image File

Select Mount Image. Then Navigate to Where You have Wilcom.ISO Stored.

Select ISO

Assuming all Went well The Wilcom Slpash Screen Will Come Up.

Wilcom Start Up Screen

If it Does Not. You may have Autorun Disabled. Simply Go To your My Computer and Run it From the New Virtual CD-Rom Manually.(You will see a New Drive Letter)

Click the Quick Install, After Installation is complete let it hang on the Final Screen

Do Not Click Finish, DO NOT Reboot.

Right Click You SytemBar, Open the TaskManager.

Task Manager

The Following will open

Locate the Process ntvdm.exe select End Process. Locate winoldap.mod and End The Process. You may have to Select End Process twice if either does not Shutdown on the First Try. Also if wowexec.exe remain open end it as well.

The Object is to Shut the Setup down without letting it reboot!

Now Run the Service Pack 4 Installation. Again, Do Not allow system to Reboot, let it hang on the Final Screen . As before open TaskManager and End all Processes Related to the Install.

Open the Wilcom 9 Patch Folder. Highlight the Bin and DesignExplorer Folders, RightClick and Copy.

Go to "C:\ESWin " and Paste Both Folders from the patch/crack folder to there corresonding folders /Bin and /DesignExplorer overwriting the Existing Folders.

You must Start Wilcom From the Start/Program Files/Wilcom/Designer or From the Icon on Your Desktop. If on the Initial Run It asks for the Version Number type without the quotes “9.0”

Enjoy

Remember All software belongs to the Original Author. They are the only ones who have the right to sell it.
If you end up using the software on a regular basis, support the author, buy it,when you are able.

Wilcom

UnOfficial Wilcom Blog

(good resource site)

Free Embroidery on Yahoo

Give me a Shout on msnmessenger or email if you need help

corvetterob266@msn.com

"I never teach my pupils; I only attempt to provide the conditions in which they can learn." --A.Einstein


Thursday, August 25, 2005

Wilcom ES Designer and Wilcom Design Workflow


Wilcom ES Designer and Wilcom Design Workflow V9.0G - V9.0R -

Service Pack 4 (combined Service Pack for V9 Wilcom ES Designer and Wilcom Design Workflow). Includes fixes and improvements contained in V9 Service Packs 1,2 and 3. Read Me SP4


Point Monogram - Fixed Wilcom Standard Fonts (ES 9 Only).This alphabet file fixes a problem with the letter G being the wrong way around in the first character. To overwrite the existing point monogram font copy the pointmonogram.esa file to your c:\eswin\wletter folder and over write the existing file. (Please make sure ES is closed when attempting to overwrite the file)

Times Roman - This alphabet file fixes the problem were some times roman letters fall below the other letters baselines. To overwrite the existing times roman font copy the TimesR.esa file to your c:\eswin\wletter folder and over write the existing file. (Please make sure ES is closed when attempting to overwrite the file).



Wilcom ES Designer and Wilcom Design Warehouse V8.0J - V8.0L

- Service Pack 1& 2 (combined Service Pack for Wilcom ES and Wilcom Design Warehouse).



Wilcom ES Designer V7.1
-
Service Pack 5 (Contains all changes in Service Packs 1-4) - Corrected Madeira Thread Chart. Save this file to your Windows Desktop then Unzip using WinZip or WinRAR, or if you have Windows XP simply right-click the file and select 'Extract To'. Copy the extracted .TCH files to your c:\eswin\res folder, and delete the old 'Madeira 40.tch' file.

Wilcom ES Designer V7.0
-
Service Pack 1 - Small Block 2 alphabet update - improved letter quality over the standard alphabet (applies to this version of ES Designer only e.g. lowercase 'u' not correct). Save this file to your c:\ESWin\wletter\ folder NOTE: this alphabet is included with all later ES Designer versions. - Corrected Madeira Thread Chart. Save this file to your Windows Desktop then Unzip using WinZip or WinRAR, or if you have Windows XP simply right-click the file and select 'Extract To'. Copy the extracted .TCH files to your c:\eswin\res folder, and delete the old 'Madeira 40.tch' file.

Wilcom ES Designer V6.1:
- Microsoft Printer and Scanner driver update Save this file to your c:\ESWin\bin folder and overwrite the existing file. This file will allow Wilcom ES to communicate more efficiently with new models of printers and scanners. NOTE: this file is included with all later versions of ES Designer; it can also be used for previous versions of ES Designer.

Wilcom ES Designer V5.5 -
Service Pack 1
Wilcom ES Designer V5.2 -
Service Pack 5 (Contains all changes contained in Service Packs 1-4)



Utilities and Components required by Wilcom products


Design Workflow, Design Warehouse and Carpet Design Warehouse Users: - Microsoft SQL Server 2000 Service Pack 3a We recommend users install this Service Pack for all MSDE installations

(Note: Please read the service pack system requirements and instructions on the Microsoft web site before installing the service pack).

Note: If you have SP3 installed already then there is no need to install SP3a. Microsoft 'XML' plugin required by Wilcom Design Explorer and Wilcom Design Warehouse/Workflow to generate design thumbnails..

Notes: The plugin can also be installed by installing Internet Explorer V6.0 or later. The plugin can only be installed on Win98SE or later.The plugin is not required for Wilcom V7 onwards.


Download and Installation Instructions:
1)
Click here to download the MSXML3.MSI file (771Kb) and click the Save button when prompted.2) Once the file has been downloaded, double-click the file and follow the on-screen instructions to install. The file can be copied and installed on any PC.


720K DOS Floppy Disk Format Utility for Windows XP
- In Windows XP Microsoft has removed the ability to format 720K DOS DD disks, but has kept the ability to read from and write to these disks. This is because the DOS 720K format is considered old technology, which Microsoft moving away from this old format. It is however still possible to format 720K DOS disks by using the command line "Format /t:80 /n:9 a:". Rather than try to remember this command line though, Wilcom Support has packaged this command line into a small batch file which you can simply run from your Desktop.


Download and Installation Instructions:
1)
Click here to download the WinXP_720K.bat file (1 kb) and click the Save button when prompted.2) Select your Windows Desktop as the location to save the 'WinXP_720K.bat' file to, then click the Save button to save the file to your Desktop.3) To run the utility, double-click the 'WinXP_720K.bat' file.4) Follow the on-screen instructions to format the disk.Caution: Always use DS/DD disks when formatting as 720K. DO NOT USE DS/HD disks with the hole taped over, as data written to such disks WILL INEVITABLY be lost after a time. DS/HD disks are not designed to take data designed for DS/DD disks and vice-versa.


MD-DOS files required by DOS Wilcom ES (Version 4.5 and earlier) - Some old DOS files required by DOS ES are no longer included with Microsoft Windows. The ZIP file below contains all the files you may be missing. Unzip the file and copy the files therein to your C:\DOS folder. Note: If you do not have a C:\DOS folder you need to create one, as DOS ES looks to the C:/DOS folder for these files..




Download and Installation Instructions:
1) Click here to download the 'MS-DOS files required by DOS ES.zip' file, click the Save button when prompted.2) Select your Windows Desktop as the location to save the 'MS-DOS files required by DOS ES.zip' file to, then click the Save button to save the file to your Desktop.3) UnZIP the ZIP file.4) Copy the contents of the file to the C:/DOS folder (you will need to create a C:/DOS folder if you do not already have one on your C: drive).


Thursday, August 11, 2005

Documentation - Wilcom Design Warehouse / ES Designer


Wilcom ES Designer
Backing up and saving your designs is an important thing to consider when creating embroidery designs. There are Auto Backup and Auto Save features within your Wilcom Designer software that you can use while creating designs. It is important to understand what these features do in order to utilize them properly. See page 729 in your V7 User Manual for more details on the Auto Save and Backup features.
Understanding the relationship between the Machine Value Jump settings, the Connectors Jump settings and the Auto Jump settings is important if you want more control over the jump lengths when you sew a design out on the embroidery machine.The three are closely related and affect one another. The three settings form a hierarchy with the values at the top of the list controlling the values for the other settings below. The hierarchy is: Machine Format Values; Auto Jump Values; Connectors Jump Values.
Creating bitmap images from your embroidery designs can be done in several ways. From V7.0 onwards, ES Designer has the ability to create bitmap images from your design via the click of a button. Images of your designs can be used for publication to websites or for e-mailing to potential customers.
Working with Input C (also known as center-line input) can be a fast and accurate way to digitize a column of stitches with a consistent width. It works well for borders and outlining designs, however there are many quick tricks you can use when working with Input C that make it more powerful than you may have realized.
Underlay, the light density layer of stitches that gets covered by the top stitches, serves an important role in the embroidery process. This document covers the basic uses of Underlay and gives some examples of which underlay to use for various types of objects.
Stitch Files, which only contain basic information such as x,y coordinates, color changes and machine functions can be opened with the option to recognise Objects and Outlines in ES Designer, to create an outline object from a stitch file. ES Designer will create objects and outlines based on patterns made by the stitches in the design. Recognition of stitch files is also customizable via advanced options.
The PDF shows the procedure of updating your existing ES version to Version 9. A update must be purchased from your local reseller or wilcom office.